Blasting, blast cabinets

 Blasting Blast Cabinets
Turntable and Work Car kit

Turntable and Work Car kit
It is used for loading heavy parts. It consists of two major components:

Supporting Turntable
It makes easier the loading of parts on the rolling work car outside the blast cabinet.
Once the work car gets into the blast enclosure, the table is turned to allow closing the door.

Rolling Work Car and Rotating Plate
It carries the parts into the blast cabinet for processing, allowing parts rotation during the blasting process.

Tumble Barrel

Tumble Barrel
It is used for medium production blasting of small parts, examples of most common applications are: nuts and bolts, bijou, clasps, medals, etc.

Components and Mounting
The tumble barrel optional kit for blast cabinets C9075 S and C1210 S is mounted replacing the standard door of any cabinet by the special barrel door which includes: a motor gear box, stamps, tumble barrel and control panel.
Automatic System
Automatic System
It is used for the automatic blasting of parts with axis of symmetry - wheels, gears, axle boxes, etc.

It mounts on the standard equipment C9075 S or C1210 S, a central rotating plate powered by a motor gear box and an alternative pneumatic system for the blasting gun.
The operator can quickly and easily adjust the variables to suit the part being blasted – changing gun positions, the distance to the parts and the blasting speed.

Description of Operation
The parts are placed in a central axis on the rotating plate and the blasting gun is adjusted so as to cover the height of the parts being blasted.
After selecting the working time through the cycle timers in the control panel, the blasting process stops once the selected time elapses.